top of page



PRO SlimCat™ Cat6 Patch Cords


Kordzify your Cat 6 networking projects with the Kordz PRO SlimCat Network Patch Cords, engineered to deliver all the power of Cat 6 in half the size. With a mere 3.9mm cable diameter, and a small profile nylon composite connector featuring the snap-proof latch that withstands 2,000 bend cycles, these cables offer unprecedented space-saving advantages without compromising the guaranteed 1 Gbps and PoE++ 100W performance. Also available in installation-friendly and 100% recyclable, patent-pending BeltPak 10-packs in black and blue, which won Top New Technology and Best of Show Awards at ISE 2024. Backed by the Kordz Lifetime Warranty, PRO SlimCat™ Network Patch Cords are the professional’s choice for networking installations. 


Category 6 Network Patch Cord Specification Standard

Application Standards:
PoE++ 80W
Performance Standard:
≤ 10.0m – Category 6 Component Tested
> 10.0m – Category 6 Channel Tested
Wiring method: T568-B
Certified Data Rate: 1 Gbps (Gigabit ethernet)
Supported Data Rate: ≥ 1 Gbps (Gigabit ethernet)
Certified Bandwidth: 1 to 250 MHz
Supported Bandwidth: ≥ 250 MHz


Cable Diameter: 28 AWG, 3.9mm/0.15ӯ
Maximum Cable Pulling Tension: 80 kgf/cmÇ
Cable to Plug Tensile Strength: TBC
Cable Bend Radius: 11.7mm | 0.46in
Recommended Total Mounting Depth: 27.7mm | 1.09in
Mating Cycles (max.): 1000 cycles
Temperature range: UL Temp rating – 75ºC


Conductors: Solid 28 AWG Oxygen Free Stranded Copper
Conductor Insulation: Polyolefin
Shielding: Not Applicable
Cable Jacket Material: UL CM-rated PVC
Connector Material: Nylon
Contact Type: 3-prong for solid/stranded conductors
Strain Relief: Injection-moulded PVC


Conductor Resistance: 223Ω/km
Insulation Resistance: 10MΩ min @100V DC

bottom of page