top of page

KRIX

PHONIX

ON-WALL

Downloads

With easy wall mounting, the Phonix deliver surround effects with clarity and power, putting you in the middle of the action.

For an all-encompassing cinema sound in a conveniently sized package, the Phonix replicates the wedge-shaped design used in Krix’s commercial cinema surround speakers, allowing it to be mounted high and away from the listener, to maintain excellent pattern control and audio coverage to all listening positions.

Designed for on wall side and rear surround sound, the Phonix offers high power handling with low frequency extension down to 45Hz.

The hefty 165mm bass driver has a 33mm voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilisation ring for low distortion. The paper cone and surround of the bass driver have been developed to provide the smoothest possible response and a dynamic and non-fatiguing vocal mid-band.

The high frequency drive unit is a specially-damped, high power, 26mm doped fabric dome tweeter. Combined with the crossover network which has been designed and built using close-tolerance, professional-grade components, the resulting sound is exceptionally smooth and well controlled.

Complete with a braced, critically-damped enclosure, finished with a neat black cloth grille, the Phonix is a beautifully designed benchmark for surround loudspeaker reproduction.

For the ultimate cinema experience at home, play it through Krix.

Specification

Frequency range

45Hz-20kHz in room response


Power handling

50-150 Watts RMS recommended amplifier power


Sensitivity

88dB for 2.83 volts at 1 metre


Impedance

8 Ohms


Configuration

2-way


Enclosure type

Bass reflex, front vented


Low frequency driver

Single 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilisation ring for low distortion


High frequency driver

26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled


Crossover point

1.8kHz


Input terminals

Gold plated binding posts


Dimensions

375mm high x 260mm wide x 205mm deep at the top (109mm deep at the bottom)


Weight

7kg each

bottom of page