top of page

KRIX

MX-5

MODULAR

Downloads

For the movie lover with a small to medium size room, the MX-5 provides big sound in a small package, allowing versatility of installation without taking up valuable space. Boasting the Krix waveguide and large mid-bass driver, movie soundtracks will be delivered with the articulation and impact you’ve always wanted.

The MX-5 features five compact modules, allowing easy installation behind an acoustically transparent screen in a wall cavity, on a shelf or cabinetry, or below a projector screen. The front baffle of each module is covered with an acoustic absorbent material to absorb any sound reflecting off the back of the screen or the room itself. This assists greatly with the acoustic treatment of the room to ensure better intelligibility and overall sound performance.

The main speakers feature a 205mm mid-bass driver which has a 38mm voice coil wound on a high-powered aluminium former. The high frequency drive unit is a damped, high power, 26mm doped fabric dome tweeter, coupled with a proprietary Krix waveguide for optimum dispersion over the entire working bandwidth.

The subwoofer units feature 275mm (11”) drivers with 50mm edge-wound copper voice coil, dual spider assembly, and vented magnet assembly.

For the ultimate cinema experience at home, play it through Krix.

Specification

SYSTEM RECOMMENDATIONS

Minimum screen size 16:9

95″ (2103mm x 1183mm)


Minimum screen size 21:9

92″ (2148mm x 921mm)



LCR SPEAKER MODULES

Frequency range

40Hz-20kHz in room response


Power handling

100 – 300 Watts RMS recommended amplifier power


Sensitivity

92dB for 2.83 volts at 1 metre


Impedance

8 Ohms


Configuration

2-way


Enclosure type

Bass reflex, front vented


Low frequency driver

Single 205mm (8”) paper cone driver. 38mm (1½”) voice coil wound on high powered aluminium former, with ventilated magnet assembly and copper shorting ring for low distortion


High frequency driver

26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide


Input terminals

Gold plated spring terminals


Dimensions

700mm high x 315mm wide x 190mm deep (2040mm wide including subwoofer modules)


Weight

12kg each



SUBWOOFER MODULES

Frequency range

30Hz-200Hz in room response


Power handling

200 – 350* Watts RMS recommended amplifier power

* The use of a power amplifier with high pass filter and soft limiter function is strongly recommended on MX subwoofers.


Recommended processing

High pass filter: 30Hz 24dB / Octave Butterworth

Limiter: 350W (4 Ohms)


Sensitivity

90dB for 2.83 volts at 1 metre


Impedance

4 Ohms


Enclosure type

Bass reflex, down-firing vent


Low frequency driver

Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2”) voice coil wound on high powered Kapton former with vented magnet assembly


Input terminals

High level gold plated spring terminals


Dimensions

700mm high x 540mm wide x 190mm deep (2040mm wide including LCR modules)


Weight

19kg each

bottom of page