top of page

KRIX

MX-30

MODULAR

Downloads

Designed for larger dedicated home cinemas with an acoustically transparent screen, the MX-30 will deliver your favourite movie soundtracks with supreme definition and accuracy, right through the picture and into your seat. Larger bass drivers and compression high frequency drivers provide an extended frequency response at higher sound pressure levels.

Featuring commercial cinema components, the Krix MX-30 provides a crisp, clear, realistic sound, with such power and precision it will make your hair stand on end.

Created for larger home cinemas measuring five to fourteen metres long, the MX-30 features five modules, all of which are the same height and slim-line depth for easy installation into one cavity. The front baffle of each module is covered with an acoustic absorbent material to absorb any sound reflecting off the back of the screen or the room itself. This assists greatly with the acoustic treatment of the room to ensure better intelligibility and overall sound performance.

The main speakers utilise a single 380mm, high stiffness, paper cone mid-bass driver with a 75mm voice coil for increased linear excursion, and a powerful vented magnet assembly designed to lower distortion. You’ll hear a pin drop and a booming soundtrack crescendo with equal clarity.

High frequencies are handled by the Krix patented 90 by 40 degree short throw horn, driven by a high frequency compression driver. Each subwoofer also contains a massive 455mm driver with 100mm voice coil, dual spider and vented magnet assembly.

With every aspect scrutinised to deliver the most faithful reproduction of your movie soundtrack, the Krix MX-30 will allow you to truly feel the on-screen action.

For the ultimate cinema experience at home, play it through Krix.

Specification

Recommended room depth

5m – 14m


Minimum screen size 16:9

135″ (2989mm x 1681mm)


Minimum screen size 21:9

130″ (3035mm x 1301mm)



LCR SPEAKER MODULES

Frequency range

38Hz-16kHz in room response


Power handling

100 – 700 Watts RMS recommended amplifier power


Sensitivity

98dB for 2.83 volts at 1 metre


Impedance

8 Ohms


Configuration

2-way


Enclosure type

Bass reflex, front vented


Low frequency driver

Single 380mm (15″) high stiffness paper cone driver with 75mm (3″) voice coil of optimal length for increased linear excursion, wound on high temperature apical former and powerful vented magnet assembly designed for low distortion


High frequency driver

A Krix patented designed 90º x 40º short throw horn with 25mm (1”) throat, 35mm (1.4”) compression driver, ferrite magnet, coated titanium diaphragm and polyimide surround


Input terminals

Gold plated spring terminals


Dimensions

1220mm high x 450mm wide x 335mm deep (2865mm wide including subwoofer modules)


Weight

48kg each



SUBWOOFER MODULES

Frequency range

25Hz-200Hz in room response


Power handling

200 – 1400 Watts RMS recommended amplifier power


Recommended processing

High pass filter: 20Hz 24dB / Octave Butterworth

Limiter: 1000W (8 Ohms)


Sensitivity

100dB for 2.83 volts at 1 metre


Impedance

8 Ohms


Enclosure type

Bass reflex, front vented


Low frequency driver

Single 455mm (18”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly


Input terminals

High level gold plated spring terminals


Dimensions

1220mm high x 750mm wide x 335mm deep (2865mm wide including LCR modules)


Weight

65kg each

bottom of page