top of page





Designed for dedicated home cinemas with an acoustically transparent screen, the MX-10 is a superb choice for those seeking an involving cinema experience with crystal clear intelligibility, large dynamic range and powerful bass.

Designed for medium size dedicated cinema rooms, the MX-10 presents the next level of modular home cinema performance, housing the same Krix waveguide and mid-bass driver of its bigger brother, the MX-20.

The MX-10 comprises of five modules, all of which are the same height and a slim depth of just 205mm for simple installation into a wall cavity. The front baffle of each module is covered with an acoustic absorbent material to absorb any sound reflecting off the back of the screen or the room itself. This assists greatly with the acoustic treatment of the room to ensure better intelligibility and overall sound performance.

The main speakers feature a 255mm bass-mid driver which has a 50mm voice coil developed to offer low harmonic distortion, especially in the critical midband.

The high frequency drive unit is a damped, high power, 26mm doped fabric dome tweeter, coupled with a proprietary Krix waveguide, for optimum dispersion over the entire working bandwidth. Each subwoofer contains a large 305mm paper cone driver with a 50mm long throw voice coil developed for high level, low frequency reinforcement.

For the ultimate cinema experience at home, play it through Krix.


Minimum screen size 16:9

95″ (2103mm x 1183mm)

Minimum screen size 21:9

100″ (2335mm x 1001mm)


Frequency range

40Hz-20kHz in room response

Power handling

100 – 500 Watts RMS recommended amplifier power


97dB for 2.83 volts at 1 metre


8 Ohms



Enclosure type

Bass reflex, front vented

Low frequency driver

Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion

High frequency driver

26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide

Input terminals

Nikel plated terminals featuring a 5mm hole to accept up to 10AWG cable


940mm high x 315mm wide x 205mm deep (2040mm wide including subwoofer modules)


15kg each

bottom of page