top of page

KRIX

CYCLONIX 11

Downloads

This low-profile, passive subwoofer will deliver formidable low frequency performance as a supporting subwoofer for an MX-5, or as a standalone subwoofer in a Series SX system.

The Cyclonix range of subwoofers are designed for edge-of-your-seat bass performance in dedicated home cinema rooms.

Their shallow depth allows them to be placed inconspicuously against a side or back wall as supporting subwoofers to a Series MX system. They can also be used as the main subwoofers in a dedicated home cinema system – either behind an acoustically transparent screen or elsewhere in the room.

The Cyclonix 11 has taken its design cues from the subwoofer modules in the MX-5 system, foregoing the acoustic absorbent material on the front baffle and instead offering an optional black cloth grille.

The 275mm bass driver features a 50mm voice coil with ventilated magnet system. The single down-firing vent is tuned to achieve maximum output, while the proprietary Krix rubber feet provide improved acoustic isolation on hard and soft floor surfaces.

A separate power amplifier is required for this subwoofer and can be connected to the LFE output of any AV processor or receiver.

For the ultimate cinema experience at home, play it through Krix.

Specification

Frequency range

30Hz-200Hz in room response


Amplifier power

200 – 350 Watts RMS recommended amplifier power


Recommended processing

High pass filter: 30Hz 24dB / Octave Butterworth

limiter: 350W (4 Ohms)


Inputs

High current spring terminals featuring a 5mm hole to accept up to 10AWG cable


Enclosure type

Bass reflex, down firing vent


Impedance

4 Ohms


Low frequency driver

Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2”) voice coil wound on high powered Kapton former with vented magnet assembly


Sensitivity

90 dB SPL (2.83V / 1m)


Dimensions

700mm high x 540mm wide x 175mm deep (195mm deep with optional grille)


Weight

17 kg each

bottom of page