top of page

LEA

CS1504D

HIGH POWER SMART AMP | 4 CH | 1500 WATTS/CH

Downloads

Introducing the CONNECT 1504D high-power IoT-enabled smart amps. This four-channel model drives 1,500 watts per channel (into 2, 4, and 8 ohms as well as 70Vrms and 100Vrms). This addition to the CONNECTSERIES amplifiers is available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. With three different methods of network connection, users can connect using the amplifier’s built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection.

Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.

Specification

AUDIO SPECIFICATIONS

INPUTS

Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity

THD+N

0.1% (20Hz to 20kHz)

FREQUENCY RESPONSE

20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω

SIGNAL TO NOISE LEVEL

105dB (20Hz to 20kHz referenced to 8Ω)

CROSSTALK

70dB (20Hz to 20kHz)

AMPLIFIER OUTPUT CLASSIFICATION

Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel

DSP

DSP ARCHITECTURE

Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters

INPUT MATRIX

Routable matrix; any input to any output with primary and secondary input priority

CROSSOVERS

Advanced DSP with Linear Phase Brickwall FIR Crossovers and up to 48dB/Octave IIR Filters (Linkwitz Riley and Butterworth)

PARAMETRIC EQ

8 Band Parametric EQ per channel

OUTPUT DELAY

4 seconds per channel

OUTPUT PROTECTION

DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection

USER ADJUSTABLE LIMITING

Peak Voltage and RMS Voltage

LOAD MONITORING

Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources

CONTROL, MONITORING, NETWORKING

USER INTERFACE

Web Browser User Interface, 3rd Party API control, or CLOUD control

EXTERNAL I/O

External I/O In: Toggles Remote On/Off
External I/O Out: Indicates Amplifier Health

OPERATION

AC MAINS

100VAC - 240VAC +/- 15% 50Hz or 60Hz

POWER SUPPLY

Universal Switch Mode Power Supply with Power Factor Correction

PHYSICAL SPEC

DIMENSIONS (L X W X H)

Product: 17.88” x 19” x 2U (362mm x 482mm x 2U) (362mm x 482mm x 2U)
Shipping: TBD

WEIGHT

26lbs / 11.8kg | Shipping: 30 lbs / 13.6 kg

COOLING

Front to Rear Variable Fan Speed Cooling
Fan Noise at idle is 50dB @ 1m
Fan Noise at 50% is 57dB @1m
Fan Noise at full speed is 63dB @ 1m

bottom of page