The AC-MXNET-10G-SW24C is a 24-port, 10Gbps hybrid PoE++/PoE+ (Ports 1-8 are PoE++, ports 9-24 are PoE+) network switch developed and manufactured by AVPro. The switch design seamlessly supports wide-ranging Audio/Video-over-IP applications, including SDVoE, Dante, AVPro Edge MXnet 10G, and others, using the latest Multigigabit campus-level switch chipset.

Doubled up to cascade in Virtual Switch Framework mode and for operation as a singular switch with an aggregate total of 48 endpoints (16 TCVRs configured as Encoders and 32 configured as Decoders), the AC-MXNET-10G-SW24C supports plug-and-play functionality without manual configuration.

Purpose-designed and built to a Carrier-Grade rating for high reliability and mission-critical applications, the AC-MXNET-10G-SW24C can accommodate two hot-swappable 530-watt power supply modules for instantaneous auto-redundancy. (Note: The AC-MXNET-10G-SW24C is shipped with a single PSU).

With 24 x 10G-mGig RJ45 ports with a total bandwidth of 480Gbps and two 40Gbps QSFP+ stacking ports with 160Gbps total bandwidth, the AC-MXNET-10G-SW24C has a calculated switching capacity of 640Gbps, providing an abundant amount of headroom safety and a generous forwarding rate for high data throughput and uniform distribution of traffic for improved network efficiency.

The AC-MXNET-10G-SW24C has been pre-configured with Quality of Service (QoS) settings optimized for Dante audio streams. These settings prioritize Dante audio packets above other network traffic, reducing latency and packet loss to ensure high-quality, uninterrupted audio streaming. AVPro is the first professional AV manufacturer to implement QoS pre-configurations specifically for Dante traffic, demonstrating our commitment to enhancing audio streaming quality in residential and commercial environments.

Processing Performance: A 680Gbps calculated switching capacity combined with a forwarding rate of 480Mpps signifies ample headroom for high data throughput and network efficiency.

Virtual Switch Framework: Synthesizes multiple AC-MXNET-10G-SW24C switches in the same layer into one logical device for high availability and scalability.

Carrier-Grade Build Rating: Carrier-Grade hardware and software design features high reliability and fail-safe redundancy capabilities for mission-critical applications, providing 99.999% uptime availability.

Fast Switching with Near-Zero Latency: Source-to-source switching to endpoints is virtually instantaneous if scaling is not required (100µs frame latency, or 1/150th of a frame). With scaling in use, the switching speed is between one to two frames, or about 17-34 milliseconds, considered visually imperceptible.

Preconfigured Comprehensive QoS: Quality of Service settings are optimized for Dante and SDVoE streams. Advanced load-balance configuration for SDVoE and MXnet applications optimize network performance by distributing high-volume data transfers and multicast streaming traffic across multiple paths to reduce congestion to optimize latency and other critical performance metrics.

Dante Audio Prioritized: AVPro is the first professional AV manufacturer to implement Dante-oriented QoS traffic prioritization to enhance network streaming performance in residential and commercial environments.

Class-Leading Performance: MXnet switches are the highest-performing switches in the AVoIP market segment.